|
CL7106CPL, ICL7107CPLAnalogue to DigitalConverter/Display Drivers |
These two ICs are high performance, low power 31/2 digit A/D converters. The input requires about 1pA typically. Other features are guaranteed zero reading for 0 volts input on all scales; true polarity at zero for precise null detection; true differential input and reference; low-noise; on chip clock and reference; low supply current 0· 8mA typical. The output of the 7106 will drive LCD displays directly and a +9V supply is required at pin 1 and ground at pin 26. This IC is ideally suited for battery operation since it requires only 0· 8mA supply current. The output of the 7107 will drive LED displays directly and a +5V supply is required at pin 1, -5V at pin 26 and ground at pin 21. Accuracy ▒1 count in ▒2000 counts guaranteed. |
Display Driver and Thermometer PCB |
A printed circuit board is available for use with the 7106 or 7107. The same printed circuit may be used to produce a ▒1· 999V (2V) voltmeter, a ▒0· 1999 |
(200mV) voltmeter or a thermometer using the LM35CZ or LM35DZ ICs, with either an LED or LCD. A leaflet is supplied with every PCB, which shows how to build and calibrate the projects. |
|
2V LCD |
200mV |
2V LED |
200mV |
R1 Min Res |
15k |
22k |
15k |
22k |
R2 Min Res |
470k |
47k |
470k |
47k |
R3 Min Res |
100k |
100k |
100k |
100k |
R4 18-turn Cermet |
10k |
1k |
10k |
1k |
R6 Min Res |
- |
- |
150 |
C1 Poly Layer |
0· 1╡F |
0· 1╡F |
0· 1╡F |
0· 1╡F |
C2 Poly Layer |
0· 047╡F |
0· 47╡F |
0· 047╡F |
0· 47╡F |
C3 Poly Layer |
0· 22╡F |
0· 22╡F |
0· 22╡F |
0· 22╡F |
C4 Ceramic |
100pF |
100pF |
100pF |
100pF |
C5 Poly Layer |
0· 01╡F |
0· 01╡F |
0· 01╡F |
0· 01╡F |
DIL Socket 40-pin |
1 |
1 |
1 |
1 |
Display - 1 needed |
PF51 |
PF51 |
BY66W |
BY66W |
Display - 1 needed |
- |
- |
BY67X |
BY67X |
|